All dials can be turned to the centre-detented position when they are not required to change the signal levels of that particular frequency. Page 9 right. MUTE - Mutes the sound from the main mix and redi- rects it to the sub group faders Same as the other channels on the mixer accept this channel can work in stereo. If you wish to run in mono connect the left jack plug only. Page 13 MIX fader to lower the signal levels. Sig- nals may be distorted if the signal levels are set to high.
ALT outputs are unbalanced and carry the signal of the channels that you have assigned to this group using the mute switch. When running your cables please make sure all cables are out of the way of where people may be walking. Damaged cables or your console being pulled off your workstation by cables being pulled on may damage the console. This manual is also suitable for: Pmx Print page 1 Print document 15 pages.
Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Quick Links Download this manual. Table of Contents. Previous Page. Next Page. Page 2 When this product reaches the end of its life, do not dispose with the household waste.
This includes remote controls and batteries. See www. Page 4 The fuses must only be replaced with a fuse of the type and rating stated on the rear panel. If the replacement fuse fails do not use a higher rated fuse, contact your local service agent or PULSE via www. Most condenser microphones require phantom power, which is a lower DC voltage delivered to the XLR microphone connector. So before you start to read what each piece of equipment does find it first in the mixer. The manual will be starting in the top right hand corner beginning with MIC1 and working its way down the channel.
All dials can be turned to the centre-detented position when they are not required to change the signal levels of that particular frequency. Page 9 right. MUTE - Mutes the sound from the main mix and redi- rects it to the sub group faders Same as the other channels on the mixer accept this channel can work in stereo.
If you wish to run in mono connect the left jack plug only.
0コメント